Honda 2004 Odyssey Service Manual page 2239

SRS
DTC Troubleshooting (cont'd)
12. Disconnect SRS unit connector B (18P) from the
SRS unit.
13. Check resistance between the No. 7 and No. 18
terminals of SRS unit connector B (18P). There
should be an open circuit, or at least 1 M .
SRS UNIT CONNECTOR B (18P)
Wire side of female terminals
Is the resistance as specif ied?
YES Faulty SRS unit; replace the SRS unit (see
page 23-382).
NO Go to step 14.
23-174
14. Disconnect the SRS floor subharness 28P
connector (A) from the SRS floor harness 28P
connector C852.
B
15. Check resistance between the No. 23 and No. 24
terminals of the SRS floor subharness 28P
connector. There should be an open circuit, or at
least 1 M .
SRS FLOOR SUBHARNESS 28P CONNECTOR
Is the resistance as specif ied?
YES
SRS floor harness.
NO Short in the SRS floor subharness or right
side wire harness; replace the faulty harness.
C852
A
Wire side of female terminals
Short in the SRS floor harness; replace the