Second Row Seat Belt Replacement - Honda 2004 Odyssey Service Manual

Seat Belts

Second Row Seat Belt Replacement

NOTE: Check the second row seat belts for damage,
and replace them if necessary.
Second Row Seat Belt
1. Remove the upper anchor cover (A), pull the lower
anchor cover (B) back, and remove the lower
anchor bolt (C).
A
2. Remove the rear side trim panel (see page 20-60).
23-8
B
C
7/16-20 UNF
32 N·m (3.3 kgf·m,
24 lbf·ft)
3. Remove the upper anchor bolt (A), the retractor
mounting ET screw (B), the retractor bolt (C), then
remove the second row seat belt (D) and retractor
(E).
A
7/16-20 UNF
32 N·m (3.3 kgf·m, 24 lbf·ft)
B
6 x 1.0 mm
4 N·m (0.4 kgf·m,
3 lbf·ft)
D
C
7/16-20 UNF
32 N·m (3.3 kgf·m,
24 lbf·ft)
4. Remove the quarter pillar trim (see page 20-59).
5. Remove the shoulder anchor adjuster (A).
A
E
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)