Honda 2004 Odyssey Service Manual page 2430

'03-04 Models
SRS indicator stays on when in ''SCS'' menu
method
1. Disconnect the battery negative cable, and wait for
3 minutes.
2. Disconnect SRS unit connector A (28P) from the
SRS unit.
A
3. Remove the gauge assembly (see page 22-100).
Disconnect gauge assembly connector C (16P) from
the gauge assembly.
4. Check resistance between the No. 9 terminal of
gauge assembly connector C (16P) and the No. 19
terminal of SRS unit connector A (28P). There
should be 0 1.0
Is the resistance as specif ied?
YES Faulty SRS indicator circuit in the gauge
assembly or poor contact at gauge assembly
connector C (16P); check the connection. If the
connection is OK, replace the gauge assembly.
C
NO Go to step 5.
.
SRS UNIT CONNECTOR A (28P)
BLU
Wire side of female terminals
GAUGE ASSEMBLY CONNECTOR C (16P)
BLU
Wire side of female terminals
(cont'd)
23-365