Door Lock Actuator Test - Honda 2004 Odyssey Service Manual

Door Lock Actuator Test

Driver's Door
1. Remove the driver's door panel (see page 20-7).
2. Disconnect the 2P connector (A) from the actuator
(B).
B
3. Check actuator operation by connecting power and
ground according to the table. To prevent damage
to the actuator, apply battery voltage only
momentarily.
Terminal
Position
LOCK
UNLOCK
4. If the actuator does not operate as specified,
replace it.
A
Terminal side of
male terminals
1 2
Passenger's Door
1. Remove the front passenger's door panel (see page
20-7).
2. Disconnect the 2P connector (A) from the actuator
(B).
3. Check actuator operation by connecting power and
ground according to the table. To prevent damage
to the actuator, apply battery voltage only
momentarily.
Terminal
Position
LOCK
UNLOCK
4. If the actuator does not operate as specified,
replace it.
A
B
Terminal side of
male terminals
1 2
(cont'd)
22-279