SRS
DTC Troubleshooting (cont'd)
33. Disconnect SRS main harness 8P connector C503
from dashboard wire harness A.
C503
34. Check resistance between the No. 27 terminal of
SRS unit connector B (28P) and body ground. There
should be an open circuit, or at least 1 M .
SRS UNIT CONNECTOR B (28P)
Wire side of female terminals
Is the resistance as specif ied?
YES
Short to ground in dashboard wire harness
A; replace dashboard wire harness A.
NO
Go to step 35.
23-312
35. Disconnect SRS floor harness 28P connector (A)
from the SRS main harness connector C851.
36. Check resistance between the No. 27 terminal of
SRS unit connector B (28P) and body ground. There
should be an open circuit, or at least 1 M .
BLU
Is the resistance as specif ied?
YES
replace the SRS main harness.
NO
replace the SRS floor harness.
A
SRS UNIT CONNECTOR B (28P)
Wire side of female terminals
Short to ground in the SRS main harness;
Short to ground in the SRS floor harness;
C851
BLU