Honda 2004 Odyssey Service Manual page 2393

SRS
DTC Troubleshooting (cont'd)
20. Check resistance between the No. 4 terminal of the
dashboard wire harness A 4P connector and the
No. 20 terminal of SRS unit connector A (28P).
There should be 0 1.0
DASHBOARD WIRE
HARNESS A
4P CONNECTOR
RED/BLU
Wire side of female terminals
Is the resistance as specif ied?
YES Faulty passenger's airbag cutoff indicator;
replace the passenger's airbag cutoff indicator.
NO Go to step 21.
21. Disconnect SRS floor subharness 28P connector (A)
from the SRS floor harness connector C582.
C582
23-328
.
SRS UNIT CONNECTOR A (28P)
RED/BLU
A
22. Check resistance between the No. 4 terminal of the
dashboard wire harness A 4P connector and the
No. 6 terminal of SRS floor subharness 28P
connector C852. There should be 0 1.0
DASHBOARD WIRE HARNESS A 4P CONNECTOR
RED/BLU
Wire side of female terminals
SRS FLOOR SUBHARNESS
28P CONNECTOR C852
Wire side of female terminals
Is the resistance as specif ied?
YES Open in the SRS floor harness; replace the
SRS floor harness.
NO Go to step 23.
23. Disconnect left side wire harness 3P connector
C558 from the SRS floor subharness.
.
RED/BLU