Honda 2004 Odyssey Service Manual page 2217

SRS
DTC Troubleshooting (cont'd)
11. Check resistance between the No. 2 terminal of the
right side wire harness 3P connector and body
ground. There should be an open circuit, or at least
1 M .
RIGHT SIDE WIRE HARNESS 3P CONNECTOR
Wire side of female terminals
Is the resistance as specif ied?
YES Go to step 12.
NO Go to step 15.
12. Check resistance between the No. 3 terminal of the
right side wire harness 3P connector and body
ground. There should be an open circuit, or at least
1 M .
RIGHT SIDE WIRE HARNESS 3P CONNECTOR
Wire side of female terminals
Is the resistance as specif ied?
YES Go to step 13.
NO Go to step 17.
23-152
BLU
YEL/BLU
13. Check resistance between the No. 7 terminal of
SRS unit connector C (8P) and the No. 3 terminal of
the right side wire harness 3P connector. There
should be 0 1 .
RIGHT SIDE WIRE HARNESS
3P CONNECTOR
YEL/BLU
Wire side of female terminals
Is the resistance as specif ied?
YES Go to step 14.
NO Go to step 19.
14. Check resistance between the No. 3 terminal of
SRS unit connector C (8P) and the No. 2 terminal of
the right side wire harness 3P connector. There
should be 0 1 .
RIGHT SIDE WIRE HARNESS
3P CONNECTOR
BLU
Wire side of female terminals
Is the resistance as specif ied?
YES Replace the SRS unit (see page 23-382).
NO Go to step 21.
SRS UNIT CONNECTOR C (8P)
YEL/BLU
SRS UNIT CONNECTOR C (8P)
BLU