Show Poe Port Info - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Mode

16.1.5 show poe port info

This command displays a summary for the ports that support the PoE function.
Format
Mode
The following fields are displayed for each port. If a port does not have link, or is not
enabled for PoE, the following fields display a value of "N/A".
16.1.5.1 Class
The Class field reports the class of the powered device according to IEEE802.3af
definition.
Table 16-1. Class of the Powered Device
Class Usage
0 Default
1 Optional
2 Optional
3 Optional
4 Not Allowed
16.1.5.2 Output
The Output field reports the power supplied to the powered device (in watts).
16.1.5.3 Limit
The LIMIT field is the preset limit defined by the "config poe port limit" command. This
value is stated in watts.
16.1.5.4 Status
The Status field reports the state of power supplied to the associated port. Possible values
are:
• Disabled—the POE function is disabled on this port
• Searching—the port is detecting POE device
16-4
Global Config
show poe port <unit/slot/port, All>
Privilege
Max Power
0.44-12.95
0.44-3.84
3.84-6.49
6.49-12.95
Reserved
v1.0, March 2006
Power Over Ethernet Commands