Loading Media In The Ohcf (Trays 6 And 7); Ohcf Maintenance (Trays 6 And 7); Consumable Supplies For The Ohcf (Trays 6 And 7); Replacing The Ohcf Bypass Tray Feed Rolls (Trays 6 And 7) - Xerox Versant 80 Press User Manual

1- or 2-Tray Oversized High Capacity Feeder (OHCF / Trays 6 and 7)
Loading Media in the OHCF (Trays 6 and
7)
Refer to Loading Media in the 1- or 2-Tray Oversized High Capacity Feeder (OHCF / Trays
6 and / or 7) for information and step-by-step instructions.

OHCF Maintenance (Trays 6 and 7)

Consumable Supplies for the OHCF (Trays 6 and 7)

CRUs (Supply Item)
OHCF Feed Roll Kit

Replacing the OHCF Bypass Tray Feed Rolls (Trays 6 and 7)

Tip
The feed rolls for OHCF bypass tray should be replaced when experiencing frequent
multifeeds, single feeds, or blank prints in the stack of the output prints.
Use this procedure to replace the OHCF Bypass tray feed rolls, which includes:
• Feed Roll
• Nudger Roll
• Retard Roll
Note
After you replace all of the feed rolls, contact your system administrator who will reset
the HFSI usuage counter for these CRU components to zero (0).
1. Locate and access the Bypass Tray on top of the OHCF.
2. Lift up and open the Bypass Tray cover to access the feed roll components.
17-2
Reorder Quantity Approximate Print Yield (Full
Color 8.5x11/A4 Prints)
1 kit 500,000
® ®
Xerox Versant 80 Press
User Guide