NEC Univerge SV8100 Features And Specifications Manual page 1889

UNIVERGE SV8100
Program
Program Name
Number
25-04-01 VRS/DISA Transfer Ring Group
With No Answer/Busy
Operation
Retrieve VM Messages:
To retrieve VM messages from outside of office:
If incoming analog trunks are used in the system
Main Number: 214-555-5678
Outside party number: 214-555-1212
Program 22-02-01: Trunk 1 DIL

Program 22-07-01: VM Pilot number, 200

Program 13-04-01: Speed Dial area No.0 -> 2145551212

Program 13-04-11: Speed Dial area No.0 -> 001 (VM BOX number, not extension number)

1. Call the main number from 214-555-1212.
2. After the VM answers the user can listen to and manage voice messages or change mailbox
settings.
VM8000 InMail – Automatic Access to VM by Caller ID
Description/Comments
For each trunk port (001~200), set
the operating mode of each DISA
trunk. This sets what happens to
the call when the DISA or
Automated Attendant caller calls a
busy or unanswered extension.
The call can either disconnect (0)
or Transfer to an alternate
destination (a ring group, In-Skin/
External, Centralized). When
setting the DISA and DID
Operating Mode, you make an
entry for each Night Service mode.
This program defines the Incoming
Ring Group when Target
extension has no answer or is
busy in DID.
Assigned Data
1
Ring Groups:
1~100
Trunk Ports:
001~200
Day/Night Mode:
1~8
0 (Disconnect)
1~100 (Incoming Ring
Group)
101 DSPDB-VM
102 (In-Skin/External
Voice Mail or VM8000
InMail)
103 Centralized VM
104 (Speed Dial table
Program 25-15-01)
Version 3000 software
or higher is required.
(default = 0)
Issue 12.0
Level
2 3

2 - 1859