NEC Univerge SV8100 Features And Specifications Manual page 1884

Issue 12.0
Conditions
The VM8000 InMail – Automatic Access to VM by Caller ID (CID) feature requires Version

5000 or higher software and the Version 5000 Enhancement license.
When using this feature the InMail does not prompt for a password on a call from the set

CID number.
Incoming calls across CCIS are not supported.

Two different mailboxes can not be tied to the same inbound CID number. If two mailboxes

are set for the same inbound CID number the system uses the first match it finds.
To use this feature, the phone number must be set in Program 13-04-01 and the voice mail

box number in Program 13-04-11. If both are not set, the system requires the normal log in
procedure of entering a valid mailbox number and security code to login.
This feature is only supported for external calls to the InMail.

Mobile Extension users can use this feature by setting the VM box number in Program

13-04-11 which corresponds to the Speed Dial number registered in Program 15-22-01.
Common Speed Dial area is used for this feature. Group or Station Speed Dial areas are

not supported with this feature.
When a number in the Common Speed Dial includes a trunk access code or end code (

the Redial name indication will work if the number matches completely.
If the same number is registered in the Common Speed Dial bin, the latest Speed Dial

number is used.
The Flexible ringing feature has priority over the VM8000 InMail – Automatic Access to VM

by Caller ID feature.
The UM8000 does not support setting this feature in SV8100 system programming. To set

this feature for the UM8000, refer to the on line UM8000 system administration guide.
To enable this feature, Program 14-01-22 (Caller ID to Voice Mail) must be set to 1.

Default Setting
Disabled
System Availability
Terminals
All Multiline Terminals
2 - 1854 VM8000 InMail – Automatic Access to VM by Caller ID
UNIVERGE SV8100
),
#