Vm8000 Inmail - Automatic Access To Vm By Caller Id; Figure 2-84 Example - User Access To Voice Mail - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

VM8000 InMail – Automatic Access to VM by

Enhancements

This feature added with Version 5000.

Before, when a user outside the system accessed their InMail mailbox, they dialed voice mail, then

entered an access code followed by their mailbox number and password (if enabled). Starting with

Version 5000 software a VM8000 InMail mailbox can be associated with a specific caller ID (CID)

number. When the CID number is presented to the InMail it will automatically log the user into their

mailbox. This enhancement improves VM accessibility for outside callers, allowing them to simply dial

the main voice mail number and be automatically logged into their mailbox.

Two types of voice mail access modes exist for this feature.

Specifying the VM Pilot number as a DID/DIL/DISA/VRS destination.

Dialing the VM pilot number after calling in from a Mobile Extension.

Program to forward a call to VM (102) by any of following Programs.

Program 22-05-01 (Incoming Ring Group)

Program 22-11-05 (Transfer Target number -1)

Program 22-11-06 (Transfer Target number -2)

Program 25-03-01 (Incoming Ring Group No.)

Program 25-04-01 (VRS/DISA Transfer Ring Group at No answer/Busy)

VM8000 InMail – Automatic Access to VM by Caller ID

Figure 2-84 Example – User Access to Voice Mail

Show Quick Links

Table of Contents