Set The Check Size - Dell E310dw User Manual

NOTE: Load the envelope into the manual feed slot with the printing surface facing up .
NOTE: Pull the envelope out completely when you reload the envelope into the manual feed slot .
NOTE: Do not put more than one envelope in the manual feed slot at one time, as it may cause a jam .
NOTE: Make sure the envelope is straight and in the correct position on the manual feed slot . If it is not, the
envelope may not be fed correctly, resulting in a skewed printout or a paper jam .
6. Send your print job to the machine.
NOTE: Change your print preferences in the Print dialog box before sending the print job from your computer .
Settings Options for Envelopes
Paper Size Com-10
DL
C5
Monarch
Envelopes
Media Type
Env. Thick
Env. Thin
7. After the printed envelope comes out of the machine, put in the next envelope. Repeat for each envelope that
you want to print.
8. When you have finished printing, return the two levers that you adjusted in former step back to their original
positions.
9. Close the back cover (the face-up output tray) until it locks in the closed position.

Set the Check Size

Your Dell machine's Check Size setting causes the machine to display a message when you remove the paper tray
from the machine, asking if you changed the paper size.
The default setting is On.
1. Press p or q to select the Paper Tray option, and then press OK.
2. Press p or q to select the Check Size option, and then press OK.
3. Press p or q to select the On or Off option, and then press OK.
Paper Handling 33