Deleting Port Vlans From Products; Assigning Dcb Ports To A Vlan - Brocade Communications Systems Brocade 8/12c User Manual

24
Port VLANs

Deleting port VLANs from products

Deleting a port VLAN removes all the interfaces on a product from that VLAN. A port VLAN can be
deleted in both the VLAN and Product views.
Deleting a port VLAN in the VLAN view
1. On the VLAN Manager dialog box, select the VLAN view.
2. Select the VLAN to be deleted. You can select multiple VLANs by holding down the Ctrl key and
3. Click Delete to launch the Deploy VLANs dialog box.
4. Deploy the VLAN configuration to the product by completing deployment steps in the section
Once the VLAN is deployed, it is deleted from the product.
Deleting a port VLAN in the Product view
1. On the VLAN Manager dialog box, select the Product view.
2. Expand the product on which you want the VLAN to be deleted.
3. Select the VLAN under the product. You can select multiple VLANs by holding down the Ctrl key
4. Click Delete to launch the Deploy VLANs dialog box.
5. Deploy the VLAN configuration to the product by completing deployment steps in the section
Once the VLAN is deployed, it is deleted from the product.

Assigning DCB ports to a VLAN

In Data Center Bridging (DCB) switches, the L2 mode of the port determines whether a port can be
in an untagged, tagged, or dual mode.
on the DCB interface.
TABLE 42
L2 mode
Access, Converged
Trunk, Converged
Converged
NOTE
To make L2 interface mode changes, you must have the DCB Management privilege.
You can change the L2 interface mode of a port using the Add LAG dialog box. See
on page 344 for instructions.
734
clicking the VLAN nodes.
"Deploying VLAN configurations"
and clicking the VLAN nodes.
"Deploying VLAN configurations"
L2 mode and tagged mode compatibility on a DCB interface
on page 735.
on page 735.
Table 42 shows the L2 mode and tagged mode compatibility
Tagged mode
Untagged
Tagged
Dual
"Adding a LAG"
Brocade Network Advisor SAN User Manual
53-1002167-01