Deleting Port Groups - Brocade Communications Systems SN3000B Administrator's Manual

12
Port configuration
3. On Port Group Configuration dialog box, select the group that you want to edit and then click
4. Edit the name of the port group in the Port Group Name field.
5. Select the Login Balancing check box and the Fabric Name Monitoring check box if you want to
6. Click Failover Enable.
7.
8. Click Failover Disable.
9. Click Failback Enable.
10. Click Yes to enable failback to all the ports in the port group or click No if you do not want to
11. Click Failback Disable.
12. Under the Select Members(N-Port)* section, select the required ports you want to group and
13. Click Save.
14. Click Close on the Port Group Configuration dialog box.

Deleting port groups

NOTE
You cannot delete the default port group 0 (pg0).
To delete port groups, perform the following steps.
1. Click a port in the Switch View to open the Port Administration window.
2. Click Configure N_Port Groups.
3. In the Port Group Configuration dialog box, select the group that you want to delete and then
4. Click Yes to confirm the action.
5. Click Close.
158
Edit/View.
The Edit/View Port Group window displays.
enable these features. Clear the check boxes to disable these features.
Upon selecting the Login Balancing check box, the F Port Auto Rebalancing and N-Port Auto
Rebalancing check boxes and Manual Balancing button become enabled.
A confirmation dialog box displays.
Click Yes to enable failover to all the ports in the port group or click No if you do not want to
enable failover.
A confirmation dialog box displays. Click Yes to disable failover to all the ports in the port group
or click No if you do want to disable failover.
A confirmation dialog box displays.
enable failback.
A confirmation dialog box displays. Click Yes to disable failback to all the ports in the port
group or click No if you do not want to disable failback.
clear the check boxes for the ports you want to remove from the port group.
click Delete. A confirmation dialog box displays.
Web Tools Adminstrator's Guide
53-1002152-01