Disk I/O for a Storage Unit
The analyzer has a built-in disk drive and RAM disk memory. You can save or get data using
these disks with Instrument BASIC.
Saving Trace Data
This program saves the analyzer's current raw measurement data to an arbitrarily named le.
d
c
Loading Trace Data
This program loads trace data from the built-in disk drive into the \
d
c
Line 40 selects the internal
exible disk drive. When you want to use the RAM disk memory,
change
Line 60 adds an extension
LIF format le, change
Figure 6-4. Saving Trace data
Figure 6-5. Loading Trace Data
to
.
to le name for the DOS format le. When you want to use
to
.
" array.
Application Programs 6-3
a
b
a
b