2. To view both primary channels on a single graticule, press:
Set SFiZ~~ZKSP to 1X.
Example of Viewing Both Primary Channels on a Single Graticule
You can control the stimulus functions of the two primary channels
Note
independent of
auxiliary channels 3 and 4 are permanently coupled by stimulus to primary
channels 1 and 2 respectively.
Press C-1 ~~~~~~~~~~:. to store the current active measurement data in the memory of
the active channel.
The data trace is now also the memory trace. You can use a memory trace for subsequent math
manipulations.
The analyzer default setting shows you the
1. 'lb view a data trace that you
This is the only memory display mode where you can change the smoothing and gating of
the memory trace.
2. To view both the memory trace and the current measurement data trace, press:
other, by pressing LMenu_) ;~~~~~~~~~~~~~~~~~ . However,
each
current
already stored to the active channel memory, press:
have
measurement data for the active channel.