To Save A Trace To A Data Register - Agilent Technologies 35670A Quick Start Manual

Agilent 35670A Quick Start Guide

To save a trace to a data register

1
Activate the trace if the one you want to save is not currently active. See "To select
the active trace."
2
Press [ ] [
Save/Recall
SAVE DATA
Data registers are cleared each time you turn off the analyzer. The analyzer uses the
data registers to store the contents of certain operations.
•
D6—is a default data register for the curve fit operation.
•
D7—is a default data register for the curve fit operation.
•
D8—is the default data register for the synthesis operation.
To recall a trace from a data register, see steps 4 and 5 of "To recall a trace from a
file."
] [ ] [
SAVE TRACE INTO D1
Saving and Plotting Data
].
51