Configure Radius-Accounting Server - Extreme Networks ExtremeWare Command Reference Manual

configure radius-accounting server

configure radius-accounting [primary | secondary] server [<ipaddress> |
<hostname>] {<L4 port no>} client-ip [<ipaddress>]
Description
Configures the primary and secondary RADIUS accounting servers.
Syntax Description
primary
secondary
ipaddress
hostname
udp_port
ipaddress
Default
The default UDP port setting is 1646.
Usage Guidelines
Use this command to specify the RADIUS accounting server information for up to two primary and two
secondary RADIUS accounting servers.
The accounting server and the RADIUS authentication server can be the same.
Use of the
<hostname>
Example
The following command configures RADIUS accounting on host radius1 using the default UDP port
(1646) for use by the RADIUS client on switch 10.10.20.30:
configure radius-accounting primary server radius1 client-ip 10.10.20.30
History
This command was first available in ExtremeWare 4.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Configure the primary RADIUS accounting server.
Configure the secondary RADIUS accounting server.
The IP address of the accounting server being configured.
The host name of the accounting server being configured.
The UDP port to use to contact the RADIUS accounting server.
The IP address used by the switch to identify itself when communicating with the RADIUS
accounting server.
parameter requires that DNS be enabled.
configure radius-accounting server
875