CHAPTER 7 PICK-UP / FEEDING SYSTEM
3. Removing the Attraction Roller Unit
1) Slide out the transfer frame, and remove
the transfer cover and the transfer frame
cover.
2) Remove the screw [1], and disconnect the
two connectors [2]; then, remove the
solenoid unit [3].
3) Remove the screw [4], detach the
positioning pin [5].
4) Move the attraction roller unit [6] to the
front.
Take care so that the at-
traction roller unit or your
fingers will not come into
contact with the transfer
sheet.
7-78
COPYRIGHT © 2002 CANON INC.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[2]
Figure 7-811
[5]
[4]
Figure 7-812
[6]
Figure 7-813
[1]
[3]