Port-Security Timer Disableport - 3Com 5500-EI PWR Reference Manual

After you execute the port-security timer autolearn command, you can display security MAC address
entries by the display mac-address security command. Though the aging time field displayed has a
value of "NOAGED", the aging of security MAC address entries is enabled already.
Examples
# Set the security mode to autolearn, the maximum number of MAC address entries allowed on the
port to 4, and the aging time for the learned security MAC address entries to 10 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] port-security timer autolearn 10
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] port-security max-mac-count 4
[Sysname-Ethernet1/0/1] port-security port-mode autolearn

port-security timer disableport

Syntax
port-security timer disableport timer
undo port-security timer disableport
View
System view
Parameters
timer: This argument ranges from 20 to 300, in seconds.
Description
Use the port-security timer disableport command to set the time during which the system temporarily
disables a port.
Use undo port-security timer disableport command restore the default time.
By default, the system disables a port for 20 seconds.
The port-security timer disableport command is used in conjunction with the port-security
intrusion-mode disableport-temporarily command to set the length of time during which the port
remains disabled.
1-18