Password:
Again:
In this case, the user interface is locked. To operate the user interface again, you need to press Enter
and provide the password as prompted.
Password:
<Sysname>
parity
Syntax
parity { even | none | odd | }
undo parity
View
AUX user interface view
Parameters
even: Performs even checks.
none: Does not check.
odd: Performs odd checks.
Description
Use the parity command to set the check mode of the user interface.
Use the undo parity command to revert to the default check mode.
By default, no check is performed.
Examples
# Set to perform even checks.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] parity even
protocol inbound
Syntax
protocol inbound { all | ssh | telnet }
View
VTY user interface view
Parameters
all: Supports both Telnet protocol and SSH protocol.
ssh: Supports SSH protocol.
locked !
1-16