Port Access Vlan - 3Com 5500-EI PWR Reference Manual

Parameters
interface-list: List of Ethernet ports to be added to or removed from a VLAN. Provide this argument in
the form of interface-list = { interface-type interface-number [ to interface-type interface-number ] }
&<1-10>, where:
interface-type is port type and interface-number is port number.
The port number to the right of the to keyword must be larger than or equal to the one to the left of
the keyword.
&<1-10> means that you can provide up to 10 port lists.
Description
Use the port command to assign one or multiple ports to a VLAN.
Use the undo port command to remove the specified ports from a VLAN.
Related command: display vlan.
Examples
# Assign GigabitEthernet1/0/2 through GigabitEthernet1/0/4 to VLAN 2.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] vlan 2
[Sysname-vlan2] port GigabitEthernet 1/0/2 to GigabitEthernet 1/0/4

port access vlan

Syntax
port access vlan vlan-id
undo port access vlan
View
Ethernet port view
Parameters
vlan-id: VLAN ID defined in IEEE802.1Q, in the range of 1 to 4094.
Description
Use the port access vlan command to assign the current access port to the specified VLAN.
Use the undo port access vlan command to remove the access port from the specified VLAN.
The VLAN specified by the vlan-id argument must already exist.
All access ports belong to VLAN 1, the system default VLAN. You cannot assign an access port to or
remove an access port from VLAN 1. If you do that, you can see the message "Can't delete ports from
or add ports to the default VLAN!"
1-8