Display Voice Vlan Status - 3Com 5500-EI PWR Reference Manual

Parameters
None
Description
Use the display voice vlan oui command to display the organizationally unique identifier (OUI) list
used for identifying voice traffic.
The output of the command displays the OUI addresses, their masks, and descriptions.
By default, there are five pre-defined OUI addresses in the system. You can use the voice vlan
mac-address command to add, modify, or remove OUI addresses.
Examples
# Display the OUI list for the voice VLAN.
<Sysname> display voice vlan oui
Oui Address
0003-6b00-0000
000f-e200-0000
00d0-1e00-0000
00e0-7500-0000
00e0-bb00-0000

display voice vlan status

Syntax
display voice vlan status
View
Any view
Parameters
None
Description
Use the display voice vlan status command to display voice VLAN-related information.
The output of the command displays information such as the voice VLAN security mode and voice
VLAN assignment mode (manual or automatic).
Related commands: voice vlan, voice vlan enable.
Examples
# Display the information about the voice VLAN.
<Sysname> display voice vlan status
Voice Vlan status: ENABLE
Voice Vlan ID: 2
Voice Vlan security mode: Security
Voice Vlan aging time: 1440 minutes
Current voice vlan enabled port mode:
Mask Description
ffff-ff00-0000 Cisco phone
ffff-ff00-0000 H3C Aolynk phone
ffff-ff00-0000 Pingtel phone
ffff-ff00-0000 Polycom phone
ffff-ff00-0000 3Com phone
1-2