Auto Detect Configuration Commands; Detect-Group - 3Com 5500-EI PWR Reference Manual

1

Auto Detect Configuration Commands

Auto Detect Configuration Commands
Refer to the Routing Protocol part of the manual for information about static routing.
Refer to the VRRP part of the manual for information about VRRP.

detect-group

Syntax
detect-group group-number
undo detect-group group-number
View
System view
Parameters
group-number: Detected group number ranging from 1 to 25.
Description
Use the detect-group command to create a detected group and enter detected group view.
Use the undo detect-group command to remove a detected group.
When a detected group is used by other features (such as static routing, VRRP, or interface backup),
the detected group cannot be deleted unless you delete the features first.
Examples
# Create detected group 10.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] detect-group 10
1-1