Display Icmp Statistics - 3Com 5500-EI PWR Reference Manual

Description
Use the display fib statistics command to display the total number of FIB entries.
Examples
# Display the total number of FIB entries.
<Sysname> display fib statistics
Route Entry Count : 8

display icmp statistics

Syntax
display icmp statistics
View
Any view
Parameters
None
Description
Use the display icmp statistics command to display the statistics about ICMP packets.
Related commands: display ip interface, reset ip statistics.
Examples
# Display the statistics about ICMP packets.
<Sysname> display icmp statistics
Input: bad formats
echo
source quench 0
echo reply
timestamp
mask requests 0
time exceeded 0
Output:echo
source quench 0
echo reply
timestamp
mask requests 0
time exceeded 0
Table 2-2 Description on the fields of the display icmp statistics command
Input:
0
5
10
0
10
5
0
Field
bad formats
bad checksum
echo
bad checksum
destination unreachable 0
redirects
parameter problem
information request
mask replies
destination unreachable 0
redirects
parameter problem
information reply
mask replies
Description
Number of received wrong format packets
Number of received wrong checksum packets
Number of received echo packets
2-6
0
0
0
0
0
0
0
0
0