3Com 5500-EI PWR Reference Manual page 198

1
Port-MAC-IP Binding Commands
Port-MAC-IP Binding Commands
am user-bind
Syntax
In system view:
am user-bind mac-addr mac-address ip-addr ip-address [ interface interface-type interface-number ]
undo am user-bind mac-addr mac-address ip-addr ip-address [ interface interface-type
interface-number ]
In Ethernet port view:
am user-bind { ip-addr ip-address | mac-addr mac-address [ ip-addr ip-address ] }
undo am user-bind { ip-addr ip-address | mac-addr mac-address [ ip-addr ip-address ] }
View
System view, Ethernet port view
Parameters
mac-address: MAC address to be bound.
ip-address: IP address to be bound.
interface-type: Type of the port to be bound.
interface-number: Number of the port to be bound.
Description
Use the am user-bind command to create a port-IP, port-MAC, port-MAC-IP, or IP-MAC binding entry.
Use the undo am user-bind command to remove a binding entry.
By default, no binding is configured.
Ensure that the IP address or MAC address in a port binding is unique in all port bindings.
For the same port, port-IP-MAC binding is mutually exclusive with port-IP binding.
Examples
# In system view, bind the MAC address 000f-e200-5101 and IP address 10.153.1.1 (supposing they
are the MAC and IP addresses of a legal user) to Ethernet1/0/1.
<Sysname> system-view
1-1