Display Storm-Constrain - 3Com 5500-EI PWR Reference Manual

Examples
# Display the statistics on the packets dropped on Ethernet 1/0/1.
<Sysname> display packet-drop interface Ethernet 1/0/1
Ethernet1/0/1:
Packets dropped By GBP full or insufficient bandwidth: 0
Packets dropped By others: 0
# Display the summary statistics on the packets dropped on all the ports.
<Sysname> display packet-drop summary
All Ethernet interfaces:
Packets dropped By GBP full or insufficient bandwidth: 0
Packets dropped By others: 605
Table 1-6 Description on the fields of the display packet-drop command
Packets dropped By GBP full or
insufficient bandwidth
Packets dropped By others

display storm-constrain

Syntax
display storm-constrain [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
|: Uses a regular expression to filter the output configuration information.
begin: Displays the configurations that begin with the string specified by regular-expression.
exclude: Displays the configurations that do not contain the string specified by regular-expression.
include: Displays the configurations that contain the string specified by regular-expression.
regular-expression: Regular expression.
Description
Use the display storm-constrain command to display the storm control configurations.
Examples
# Display the storm control configurations.
<Sysname> display storm-constrain
Flow Statistic Interval: 5(second)
Field Description
Number of packets dropped because the GBP is full or the
bandwidth is insufficient.
Number of packets dropped because of other reasons.
1-13