Port-Security Port-Mode - 3Com 5500-EI PWR Reference Manual

Description
Use the port-security oui command to set an OUI value for authentication.
Use the undo port-security oui command to cancel the OUI value setting.
By default, no OUI value is set for authentication.
The OUI value set by this command takes effect only when the security mode of the port is set to
userLoginWithOUI by the port-security port-mode command.
The OUI value set by this command cannot be a multicast MAC address.
Related commands: port-security port-mode.
Examples
# Configure an OUI value of 00ef-ec00-0000, setting the OUI index to 5.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] port-security oui 00ef-ec00-0000 index 5

port-security port-mode

Syntax
port-security port-mode { autolearn | mac-and-userlogin-secure | mac-and-userlogin-secure-ext
| mac-authentication | mac-else-userlogin-secure | mac-else-userlogin-secure-ext | secure |
userlogin |
userlogin-secure-or-mac-ext | userlogin-withoui }
undo port-security port-mode
View
Ethernet port view
Parameters
Table 1-3 shows the description on the security mode keywords.
userlogin-secure | userlogin-secure-ext
1-14
| userlogin-secure-or-mac |