Port Link-Aggregation Group - 3Com 5500-EI PWR Reference Manual

Description
Use the link-aggregation group mode command to create a manual or static aggregation group.
Use the undo link-aggregation group command to remove the specified aggregation group.
Related commands: display link-aggregation summary.
Examples
# Create manual aggregation group 22
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] link-aggregation group 22 mode manual

port link-aggregation group

Syntax
port link-aggregation group agg-id
undo port link-aggregation group
View
Ethernet port view
Parameters
agg-id: Aggregation group ID, in the range of 1 to 416.
Description
Use the port link-aggregation group command to add the current Ethernet port to a manual or static
aggregation group.
Use the undo port link-aggregation group command to remove the current Ethernet port from the
aggregation group.
Related commands: display link-aggregation verbose.
Examples
# Add Ethernet 1/0/1 to aggregation group 22.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] port link-aggregation group 22
1-8