Storm-Constrain - 3Com 5500-EI PWR Reference Manual

View
Ethernet port view
Parameters
10: Configures 10 Mbps as an auto-negotiation speed of the port.
100: Configures 100 Mbps as an auto-negotiation speed of the port.
1000: Configures 1,000 Mbps as an auto-negotiation speed of the port.
Description
Use the speed auto [ 10 | 100 | 1000 ]* command to configure auto-negotiation speed(s) for the current
port.
By default, the port speed is auto-negotiated.
The last configuration will take effect if you configure the command for multiple times.
Examples
# Configure 10 Mbps and 1000 Mbps as the auto-negotiation speeds of Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] speed auto 10 1000

storm-constrain

Syntax
storm-constrain { broadcast | multicast | unicast } max-packets min-packets { pps | kbps }
undo storm-constrain { all | broadcast | multicast | unicast }
View
Ethernet port view
Parameters
broadcast: Specifies to control broadcast traffic on the port.
multicast: Specifies to control multicast traffic on the port.
unicast: Specifies to control unicast traffic on the port.
all: Cancels all the storm control threshold configurations on the port.
pps: Specifies the storm constrain threshold in packets.
kbps: Specifies the storm constrain threshold in kilobits per second (kbps).
max-packets: Upper threshold of the traffic on the port, in pps, or kbps. It ranges from 1 to
4,294,967,295 and must be greater than or equal to the lower threshold.
min-packets: Lower threshold of the traffic on the port, in pps, or kbps. It ranges from 1 to 4,294,967,295,
and must be less than or equal to the upper threshold.
1-33