Vrrp Vrid Track Detect-Group - 3Com 5500-EI PWR Reference Manual

undo timer wait
View
Detected group view
Parameters
seconds: Timeout waiting for an ICMP reply. This argument ranges from 1 to 30 (in seconds) and
defaults to 2.
Description
Use the timer wait command to set a timeout waiting for an ICMP reply.
Use the undo timer wait command to restore the default.
By default, timeout waiting for an ICMP reply in an auto detect operation is 2 seconds. When an Auto
Detect-enabled switch detects objects, it sends an ICMP Request to each detected object. If the switch
fails to receive an ICMP Reply from the object within the time waiting for an ICMP Reply configured with
the time wait command, the switch re-sends an ICMP Request until the maximum retry times
configured with the retry command is reached. If still no ICMP Reply is received, the destination IP
address is considered as unreachable.
Examples
# Set a timeout of 3 seconds waiting for an ICMP reply in detected group 10.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] detect-group 10
[Sysname-detect-group-10] timer wait 3

vrrp vrid track detect-group

Syntax
vrrp vrid virtual-router-id track detect-group group-number [ reduced value-reduced ]
undo vrrp vrid virtual-router-id track detect-group [ group-number ]
View
VLAN interface view
Parameters
virtual-router-id: Virtual router ID ranging from 1 to 255.
group-number: Detected group number ranging from 1 to 25.
value-reduced: Value by which the priority is to be reduced. This argument ranges from 1 to 255 and
defaults to 10.
Description
Use the vrrp vrid track detect-group command to specify an auto detected group for a VRRP group.
Use the undo vrrp vrid track detect-group command to cancel the configuration.
1-8