Shutdown - 3Com 5500-EI PWR Reference Manual

undo name
View
VLAN view
Parameter
text: VLAN name, in the range of 1 character to 32 characters. It can contain special characters and
spaces.
Parameter
Use the name command to assign a name to the current VLAN.
Use the undo name command to restore to the default VLAN name.
By default, the name of a VLAN is its VLAN ID, such as "VLAN 0001".
Example
# Specify the name of VLAN 2 as "test vlan".
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] vlan 2
[Sysname-vlan2] name test vlan

shutdown

Syntax
shutdown
undo shutdown
View
VLAN interface view
Parameter
None
Description
Use the shutdown command to disable the VLAN interface.
Use the undo shutdown command to enable the VLAN interface.
By default, the VLAN interface is enabled. In this case, the physical status of the VLAN interface is
affected by that of the ports in the VLAN.
When all the Ethernet ports in the VLAN are down, the VLAN interface of the VLAN is down, that is,
the VLAN interface is disabled.
When one or more Ethernet ports in the VLAN are up, the VLAN interface of the VLAN is up, that is,
the VLAN interface is enabled.
If you disable the VLAN interface, the status of the VLAN interface will always be down, regardless of
the status of the ports in the VLAN.
1-5