Display Udp Statistics - 3Com 5500-EI PWR Reference Manual

Table 2-6 Description on the fields of the display tcp status command
*
TCPCB
Local Add:port
Foreign Add:port
State

display udp statistics

Syntax
display udp statistics
View
Any view
Parameters
None
Description
Use the display udp statistics command to display the statistics about UDP packets.
Related commands: reset udp statistics.
Examples
# Display the statistics about UDP packets.
<Sysname> display udp statistics
Received packets:
Total: 26320
checksum error: 0
shorter than header: 0, data length larger than packet: 0
no socket on port: 0
total broadcast or multicast packets : 25006
no socket broadcast or multicast packets: 24989
not delivered, input socket full: 0
input packets missing pcb cache: 1314
Sent packets:
Total: 7187
Table 2-7 Description on the fields of the display udp statistics command
Total
Received
Field
Field
If there is an asterisk before a connection, it
means that the TCP connection is authenticated
through the MD5 algorithm.
TCP control block
Local IP address and port number
Remote IP address and port number
State of the TCP connection
Description
Total number of received UDP packets
2-13
Description