Radius-Server Retransmit - Cisco Nexus 5500 Series Command Reference Manual

Chapter R Commands

radius-server retransmit

To specify the number of times that the switch should try a request with a RADIUS server, use the
radius-server retransmit command. To revert to the default, use the no form of this command.
Syntax Description
count
Command Default
1 retransmission
Command Modes Global configuration mode
Command History Release
5.2(1)N1(1)
Examples This example shows how to configure the number of retransmissions to RADIUS servers:
switch(config)# radius-server retransmit 3
This example shows how to revert to the default number of retransmissions to RADIUS servers:
switch(config)# no radius-server retransmit 3
Related Commands Command
show radius-server
OL-27883-02
radius-server retransmit count
no radius-server retransmit count
Number of times that the switch tries to connect to a RADIUS server before
reverting to local authentication. The range is from 1 to 5 times.
Modification
This command was introduced.
Description
Displays RADIUS server information.
Cisco Nexus 5500 Series NX-OS Security Command Reference
radius-server retransmit
225