Debug Platform - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

debug platform

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug platform
To enable debugging for the platform manager, use the debug platform command in EXEC mode. To
disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description
all
fcid fc-id
error
module slot
flow
fsm
ha
hitless
mts
pkt
pkthdr
tx
rx
nopowerdown
supervisor-reset
pkt
pkthdr
tx
rx
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Cisco MDS 9000 Family Command Reference
6-86
debug platform {all [fc_id fc-id] | error [module slot] | flow [module slot] | fsm | ha | hitless |
mts {pkt | pkthdr} {tx | rx} | nopowerdown | supervisor-reset}
no debug platform {all [fc_id fc-id] | error [module slot] | flow [module slot] | fsm | ha | hitless |
mts {pkt | pkthdr} {tx | rx} | nopowerdown | supervisor-reset}
Enables debugging for all platform features.
(Optional) Restricts debugging to the specified FC ID module number. The range
is 0 to 2147483647.
Enables debugging for platform-related error conditions.
Restricts debugging to the specified module.
Enables debugging for platform-related flows.
Enables debugging for platform-related FSMs.
Enables debugging for platform-related high availability.
Enables the platform loading feature while the switch is in hitless mode.
Enables debugging for platform-related tx/rx MTS events.
Enables debugging of packets.
Enables debugging of headers.
Enables debugging in the transmit direction.
Enables debugging in the receive direction.
Enables powering down modules
Resets the local supervisor.
Enables debugging of packets.
Enables debugging of headers.
Enables debugging in the transmit direction.
Enables debugging in the receive direction.
Modification
This command was introduced.
Chapter 6 Debug Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x