Debug Fspf - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

debug fspf

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug fspf
To enable debugging for the FSPF feature, use the debug fspf command in EXEC mode. To disable a
debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
Syntax Description
all
interface type number
vsan vsan-id
database
error
event
fc
pkt
pkthdr
both
tx
rx
flood
ha
mts
node range
opcode range
sap range
numpkt range
retrans
route
timer
Cisco MDS 9000 Family Command Reference
6-56
debug fspf {all [interface type number] [vsan vsan-id] | database [interface type number] [vsan
vsan-id | error | event [interface type number] [vsan vsan-id] | fc {pkt | pkthdr} {both | tx |
rx} [interface type number] [vsan vsan-id] | flood [interface type number] [vsan vsan-id] |
ha [interface type number] [vsan vsan-id] | mts {pkt {both | rx [node range | opcode range |
sap range] | tx} | pkthdr {both | rx [numpkt range] | tx}} | retrans [interface type number]
[vsan vsan-id] | route | timer}
no debug fspf {all [interface type number] [vsan vsan-id] | database [interface type number]
[vsan vsan-id | error | event [interface type number] [vsan vsan-id] | fc {pkt | pkthdr} {both
| tx | rx} [interface type number] [vsan vsan-id] | flood [interface type number] [vsan vsan-id] |
ha [interface type number] [vsan vsan-id] | mts {pkt {both | rx [node range | opcode range |
sap range] | tx} | pkthdr {both | rx [numpkt range] | tx}} | retrans [interface type number]
[vsan vsan-id] | route | timer}
Enables debugging for all FSPF features.
Restricts debugging to the specified interface.
Restricts debugging to the specified VSAN.
Enables debugging for the FSPF database.
Enables debugging for FSPF error conditions.
Enables debugging for FSPF events.
Enables debugging of Fibre Channel packets and headers.
Enables debugging for FCC tx/rx FCC packets.
Enables debugging for FCC tx/rx FCC headers.
Specifies debugging in both the transmit and receive directions.
Specifies debugging in the transmit direction,
Specifies debugging in the receive direction.
Enables debugging for FSPF flodding events.
Enables debugging for FSPF high availability.
Enables debugging for FSPF tx/rx MTS events.
Specifies the node for the packets in the receive direction. The integer
range is from 1 to 4096.
Specifies the opcode for the packets in the receive direction. The integer
range is from 1 to 4096.
Specifies the sap for the packets in the receive direction. the integer
range is from 1 to 4096.
Specifies the number of required packets
Enables debugging for FSPF retransmits.
Enables debugging for FSPF route computation.
Enables debugging for FSPF timers.
Chapter 6 Debug Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x