Debug Mip - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

debug mip

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug mip
To enable debugging for multiple IP (MIP) kernel drivers, use the debug mip command in EXEC mode.
To disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description
errors
events
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays the system output when the debug mip errors command is issued:
switch# debug mip errors
Related Commands Command
no debug all
Cisco MDS 9000 Family Command Reference
6-80
debug mip {errors | events}
no debug mip {errors | events}
Modification
This command was introduced.
Description
Disables all debugging.
Enables debugging for MIP error conditions.
Enables debugging for MIP events.
Chapter 6 Debug Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x