Chapter 6
Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug fdmi
To enable debugging for the Fabric-Device Management Interface (FDMI) feature, use the debug fdmi
command in EXEC mode. To disable a debug command, use the no form of the command or use the no
debug all command to turn off all debugging.
Syntax Description
all
errors
fdmi-messages
vsan vsan-id
ha
mts
pkt
both
tx
node range
opcode range
sap range
rx
pkthdr
numpkt range
pss
trace
Defaults
Disabled.
Command Modes
EXEC mode.
Command History
Release
1.3(2)
OL-18089-01, Cisco MDS NX-OS Release 4.x
debug fdmi {all | errors | fdmi-messages [vsan vsan-id] | ha | mts {pkt {both | rx [node range |
opcode range | sap range] | tx} | pkthdr {both | tx | rx [numpkt range]} | pss | trace}
no debug fdmi {all | errors | fdmi-messages [vsan vsan-id] | ha | mts {pkt {both | rx [node range
| opcode range | sap range] | tx} | pkthdr {both | tx | rx [numpkt range]} | pss | trace}
Modification
This command was introduced.
Enables debugging for all FDMI features.
Enables debugging for FDMI error conditions.
Enables the dump of FDMI PDUs.
(Optional) Restricts debugging to the specified VSAN.
Enables the dump of HA synchronization messages.
Enables debugging for FDMI tx/rx MTS events.
Enables debugging for FCC tx/rx FCC packets.
Specifies debugging in both the transmit and receive directions.
Specifies debugging in the transmit direction,
Specifies the node for the packets in the receive direction. The integer
range is from 1 to 4096.
Specifies the opcode for the packets in the receive direction. The integer
range is from 1 to 4096.
Specifies the sap for the packets in the receive direction. the integer
range is from 1 to 4096.
Specifies debugging in the receive direction.
Enables debugging for FCC tx/rx FCC headers.
Specifies the number of required packets
Enables debugging for FDMI PSSs.
Restricts debugging for FDMI traces.
Cisco MDS 9000 Family Command Reference
debug fdmi
6-49