Radius - Cisco 350 Series Administration Manual

17
STEP 7
STEP 8

RADIUS

322
- Global—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
• Link Local Interface—Select the link local interface (if IPv6 Address Type Link Local
is selected) from the list.
• Server IP Address/Name—Enter the IP address or name of the TACACS+ server.
• Priority—Enter the order in which this TACACS+ server is used. Zero is the highest
priority TACACS+ server and is the first server used. If it cannot establish a session with
the high priority server, the device tries the next highest priority server.
• Key String—Enter the default key string used for authenticating and encrypting
between the device and the TACACS+ server. This key must match the key configured
on the TACACS+ server.
A key string is used to encrypt communications by using MD5. You can select the
default key on the device, or the key can be entered in Encrypted or Plaintext form. If
you do not have an encrypted key string (from another device), enter the key string in
plaintext mode and click Apply. The encrypted key string is generated and displayed.
If you enter a key, this overrides the default key string if one has been defined for the
device on the main page.
• Timeout for Reply—Select User Defined and enter the amount of time that passes
before the connection between the device and the TACACS+ server times out. Select
Use Default to use the default value displayed on the page.
• Authentication IP Port—Enter the port number through which the TACACS+ session
occurs.
• Single Connection—Select to enable receiving all information in a single connection.
If the TACACS+ server does not support this, the device reverts to multiple
connections.
Click Apply. The TACACS+ server is added to the Running Configuration file of the device.
To display sensitive data in plaintext form on this page, click Display Sensitive Data As
Plaintext.
Remote Authorization Dial-In User Service (RADIUS) servers provide a centralized 802.1X
or MAC-based network access control.
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Security
RADIUS