Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 397

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug fcsp-mgr
To enable debugging for the Fibre Channel Security Protocol (FC-SP) manager, use the debug fcsp-mgr
command in EXEC mode. To disable a debug command, use the no form of the command or use the no
debug all command to turn off all debugging.
Syntax Description
all
critical
datastructure
dhchap
error
event-gen
fc2
fsm
general
ha
init
level1
level2
level3
level4
level5
message
mts
notify
trace
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.3(2)
OL-18089-01, Cisco MDS NX-OS Release 4.x
debug fcsp-mgr {all | critical | datastructure | dhchap | error | event-gen | fc2 | fsm | general |
ha | init | level1 | level2 | level3 | level4 | level5 | message | mts | notify | trace}
no debug fcsp-mgr {all | critical | datastructure | dhchap | error | event-gen | fc2 | fsm | general
| ha | init | level1 | level2 | level3 | level4 | level5 | message | mts | notify | trace}
Modification
This command was introduced.
Enables debugging for all FC-SP features.
Enables debugging of FC-SP critical errors.
Enables debugging of FC-SP data structures.
Enables debugging of DHCHAP.
Enables debugging of FC-SP error.
Enables debugging of FC-SP event generation.
Enables debugging of FC-SP FC2 messages.
Enables debugging of FC-SP events.
Enables general debugging of FC-SP.
Enables debugging of FC-SP high availability
Enables debugging of FC-SP initialization.
Sets debugging level of FC-SP Mgr to 1.
Sets debugging level of FC-SP Mgr to 2.
Sets debugging level of FC-SP Mgr to 3.
Sets debugging level of FC-SP Mgr to 4.
Set debugging level of FC-SP Mgr to 5.
Enables debugging of FC-SP messages.
Enables debugging of FC-SP MTS messages.
Sets debug level to notify.
Enables debugging of FC-SP function enter/exit.
Cisco MDS 9000 Family Command Reference
debug fcsp-mgr
6-47