Installing Idsm-2; Specifications - Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Manual

Installing IDSM-2

This chapter lists the software and hardware requirements of IDSM-2, and describes how to remove and
install it. It contains the following sections:
•
•
•
•
•
•
•
•
•

Specifications

Table 7-1
Table 7-1
Specification
Dimensions (H x W x D)
Weight
Operating temperature
Nonoperating temperature
Humidity
78-16124-01
Specifications, page 7-1
Software and Hardware Requirements, page 7-2
Supported IDSM-2 Configurations, page 7-2
Using the TCP Reset Interface, page 7-3
Front Panel Features, page 7-3
Installation and Removal Instructions, page 7-4
Enabling Full Memory Tests, page 7-12
Resetting IDSM-2, page 7-13
Powering IDSM-2 Up and Down, page 7-15
lists the specifications for IDSM-2.
IDSM-2 Specifications
C H A P T E R
Description
1.18 x 15.51 x 16.34 in. (30 x 394 x 415 mm)
Minimum: 3 lb (1.36 kg)
Maximum: 5 lb (2.27 kg)
+32° to +104°F (+0° to +40°C)
–40° to +167°F (–40° to +75°C)
10% to 90%, noncondensing
Installing Cisco Intrusion Prevention System Appliances and Modules 5.0
7
7-1