Front And Back Panel Features - Cisco IPS 7.1 Installation Manual

Chapter 3 Installing the IPS 4240 and IPS 4255

Front and Back Panel Features

Although the graphics shows the IPS 4240, the IPS 4255 has the same front and back panel features and
Note
indicators.
This section describes the IPS 4240 and IPS 4255 front and back panel features and indicators.
Figure 3-1
Figure 3-1
Table 3-1
Table 3-1
Indicator
Power
Status
Flash
Figure 3-2
Figure 3-2
OL-24002-01
shows the front view of the IPS 4240 and IPS 4255.
IPS 4240/IPS 4255 Front Panel Features
describes the front panel indicators on the IPS 4240 and IPS 4255.
Front Panel Indicators
Description
Off indicates no power. Green when the power supply is running.
Blinks green while the power-up diagnostics are running or the system is booting. Solid
green when the system has passed power-up diagnostics. Solid amber when the
power-up diagnostics have failed.
Off when the compact flash device is not being accessed. Blinks green when the
compact flash device is being accessed.
shows the back view of the IPS 4240 and IPS 4255.
IPS 4240 and IPS 4255 Back Panel Features
Management0/0
USB ports
(not used)
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
PWR STATUS FLASH
Power Flash
Status
GigabitEthernet0/0
External
compact
flash device
(not used)
FLASH
LINK SPD LINK SPD LINK SPD LINK SPD
3 2 1 0
Status
indicator
Power
Compact
indicator
flash device
indicator
Front and Back Panel Features
Cisco IPS 4240
series
Intrusion Prevention Sensor
Serial
console Indicator
Power
port light
switch
Power
Auxiliary
connector
port
(not used)
3-3