Password Recovery Commands - D-Link DES-3852 - xStack Switch - Stackable Cli Manual

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
The Password Recovery commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
reset password <username>
reset factory
restart
reset account {<username>}
show account_list
Each command is listed, in detail, in the following sections.
reset password
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To reset the password:
reset factory
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To reset the factory defaults:
Parameters
Used to reset (set to empty) already created account's password
reset password <username>
The reset password command reset (set to empty) already created
account's password.
username - To specify the user name for the account to be reset.
This command is only available in password recovery mode.
>reset password user1
Command: reset password user1
Success.
>
Used to reset the configuration to default setting.
reset factory
The reset factory command reset to default setting.
None.
This command is only available in password recovery mode.
P R
ASSWORD
429
62
C
ECOVERY OMMANDS