D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 111

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Member ports
Static ports
Current Untagged ports
Static Untagged ports
Forbidden ports
VID
VLAN TYPE
Member ports
Static ports
Current Untagged ports
Static Untagged ports
Forbidden ports
Total Entries : 2
DES-3800:admin#
config vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add 4 through 8 as tagged ports to the VLAN v1:
DES-3800:admin#config vlan v1 add tagged 4-8
Command: config vlan v1 add tagged 4-8
Success.
DES-3800:admin#
To delete ports from a VLAN:
DES-3800:admin#config vlan v1 delete 6-8
Command: config vlan v1 delete 6-8
Success.
: 1,5-26
: 1,5-26
: 1,5-26
: 1,5-26
:
: 4094
: static
: 2-4
: 2-4
: 2-4
: 2-4
:
Used to add additional ports to a previously configured VLAN.
config vlan <vlan_name 32> {[add [tagged | untagged |
forbidden] | delete] <portlist> | advertisement [enable | disable]}
This command is used to add ports to the port list of a previously
configured VLAN. The additional ports can be specified as tagging,
untagging, or forbidden. The default is to assign the ports as
untagging.
<vlan_name 32> − The name of the VLAN to which to add ports.
add − Entering the add parameter will add ports to the VLAN. There
are three types of ports to add:
• tagged − Specifies the additional ports as tagged.
• untagged − Specifies the additional ports as untagged.
• forbidden − Specifies the additional ports as forbidden
delete − Deletes ports from the specified VLAN.
<portlist> − A port or range of ports to add to, or delete from the
specified VLAN.
advertisement [enable | disable] − Enables or disables GVRP on the
specified VLAN.
Only Administrator or Operator-level users can issue this command.
107
VLAN Name : Trinity
Advertisement: Enabled