D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 206

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Example usage:
To configure DVMRP configurations of IP interface System:
DES-3800:admin#config dvmrp ipif System neighbor_timeout 30
metric 1 probe 5
Command: config dvmrp ipif System neighbor_timeout 30 metric 1
probe 5
Success
DES-3800:admin#
enable dvmrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable DVMRP:
disable dvmrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable DVMRP:
Used to enable DVMRP.
enable dvmrp
This command, in combination with the disable dvmrp command
below, is used to enable and disable DVMRP on the Switch.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#enable dvmrp
Command: enable dvmrp
Success.
DES-3800:admin#
Used to disable DVMRP.
disable dvmrp
This command is used, in combination with the enable dvmrp
command above, is used to enable and disable DVMRP on the Switch.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#disable dvmrp
Command: disable dvmrp
Success.
DES-3800:admin#
202