D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 399

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
show pim ipmroute
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To view the PIM routes:
DES-3800:admin# show pim ipmroute
Command: show pim ipmroute
PIM IP Multicast Route Table
UA = Upstream AssertTimer
AM = Assert Metric
AMPref = Assert MetricPref
ARB = Assert RPTBit
Group Address
-------------
224.0.1.1
224.0.1.24
224.0.1.24
224.0.1.24
229.55.150.208
229.55.150.208
229.55.150.208
229.55.150.208
229.55.150.208
229.55.150.208
229.55.150.208
239.192.0.1
Total Entries: 12
DES-3800:admin#
create pim register_checksum_include_data
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To create an RP to which the Switch will send Register packets to and create checksums to be included with the data in
Registered packets:
Used to display the PIM IP Multicast Route Table on the Switch.
show pim ipmroute
This command will display the PIM IP Multicast Route Table on the
Switch. This command is for PIM-SM configurations only.
None.
None.
Source Address
----------------
31.43.51.81/32
10.54.81.250/32
10.55.68.64/32
31.43.51.81/32
10.6.51.1/32
10.38.45.151/32
10.38.45.192/32
10.50.93.100/32
10.51.16.1/32
10.59.23.10/32
31.43.51.81/32
31.43.51.81/32
Used to set the RPs that the Switch will send Register packets to and
create checksums to be included with the data in Registered packets.
create pim register_checksum_include_data rp_ address <ipaddr>
This command will set the RPs that the Switch will send Register packets
to and create checksums to be included with the data in Registered
packets. This command is for PIM-SM configurations only.
rp_address <ipaddr> - Enter the IP address of the RP that will verify
checksums included with Registered packets.
Only Administrator or Operator-level users can issue this command.
UA AM AMPref
---- ---- ------
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
395
ARB Flag
------ ----
0 rpt
0 spt
0 spt
0 rpt
0 spt
0 spt
0 spt
0 spt
0 spt
0 spt
0 rpt
0 rpt
Type
-------
(*.G)
(S.G)
(S.G)
(*.G)
(S.G)
(S.G)
(S.G)
(S.G)
(S.G)
(S.G)
(*.G)
(*.G)