xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config rip
Restrictions
Example usage:
To change the RIP receive mode for the IP interface System:
DES-3800:admin#config rip ipif System rx_mode v1_only
Command: config rip ipif System rx_mode v1_only
Success.
DES-3800:admin#
enable rip
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable RIP:
disable rip
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable RIP:
state [enable | disable] − Allows RIP to be enabled and disabled on the
Switch.
Only Administrator or Operator-level users can issue this command.
Used to enable RIP.
enable rip
This command is used to enable RIP on the Switch.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#enable rip
Command: enable rip
Success.
DES-3800:admin#
Used to disable RIP.
disable rip
This command is used to disable RIP on the Switch.
None.
Only Administrator or Operator-level users can issue this command.
188