D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 44

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Command: delete snmp community dlink
Success.
DES-3800:admin#
show snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the snmp community string configurations:
DES-3800:admin# show snmp community
Command: show snmp community
SNMP Community Table
Community Name
-------------------------------
private
Index : public
Community Name
-------------------------------
public
Total Entries : 2
DES-3800:admin#
config snmp engineID
Purpose
Syntax
Description
Parameters
Used to display the snmp community string configurations.
show snmp community { <community_string> }
The show snmp communtiy command displays the community
string configurations..
<community_string>- Type in the string of the community that
needs to be deleted. If no specific community string is specified, all
community string information will be displayed.
Only Administrator or Operator-level users can issue this command.
View Name
-----------------------
CommunityView
View Name
-----------------------
CommunityView
Used to configure an identifier for the SNMP engine on the switch.
config snmp engineID
The config snmp engineID command configures a identifier for the
SNMP engine on the switch. Associated with each SNMP entity is a
unique engineID.
snmp_engineID- Identify for the SNMP engine on the switch. It is
octet string type.
40
Access Right
------------
read_write
Access Right
------------
read_only