D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 366

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config double_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add ports 4 through 8 as access ports to the Double VLAN Trinity:
Used to config the parameters for a previously created Double VLAN
on the Switch.
config double_vlan <vlan_name> {[add [uplink | access] |
delete] <portlist> | tpid <hex 0x0-0xffff>}
This command is used to create a Double VLAN (service provider
VLAN) on the Switch.
vlan <vlan_name 32> - The name of the Double VLAN to be
configured. The user is to enter an alphanumeric string of up to 32
characters to identify this VLAN.
add – Specify this parameter to add ports configured in the <portlist>
as one of the two following types of ports.
•
uplink – Add this parameter to configure these ports as
uplink ports. Uplink ports are for connecting Switch VLANs
to the Provider VLANs on a remote source. Only gigabit
ports can be configured as uplink ports.
•
access - Add this parameter to configure these ports as
access ports. Access ports are for connecting Switch
VLANs to customer VLANs. Gigabit ports can not be
configured as access ports.
•
portlist – Enter a list of ports to be added to this VLAN. A
list of ports are configured by entering the first and last port
of the list, separated by a dash. Multiple separate ports
may be entered by separating them with a comma.
delete - Specify this parameter to delete ports configured in the
<portlist> from this VLAN.
•
portlist – Enter a list of ports to be deleted from this VLAN.
A list of ports are configured by entering the first and last
port of the list, separated by a dash. Multiple separate
ports may be entered by separating them with a comma.
tpid <hex 0x0-0xffff>- The tag protocol ID. This ID, identified here in
hex form, will help identify packets to devices as Double VLAN
tagged packets. The default setting is 0x8100.
Only Administrator or Operator-level users can issue this command.
Users must have the Switch enabled for Double VLANs.
DES-3800:admin#config double_vlan Trinity add access 4-
8
Command: config double_vlan Trinity add access 4-8
Success.
DES-3800:admin#
362